The wheels of vehicles need constant care. This is necessary for their proper behavior on the road and to ensure the safety of both the driver and passengers and other road users. Regardless of driving experience and experience, at any time you may face the need to repair your car or wheels. Our car service, where experienced masters carry out high-quality tire fitting in Kyiv, will help you with this. Prices of tire fitting and the cost of other car service services are undoubtedly more attractive than other metropolitan workshops.
The tire fitting of our service includes the services of disassembly and subsequent installation of new tires on wheels. Balancing is performed before installing a new wheel. This is necessary for proper weight distribution. Car tire fitting required:
when the tire is damaged; seasonally; balancing is required every 15,000 km.
To perform the procedure correctly, you need special equipment that can only be provided by service stations. Tire installation at our service station is performed in compliance with the following rules:
high-quality wheel washing for precise balancing and prevention of shifts of the center of gravity; balancing a clean properly inflated wheel with a special stand.
The use of equipment allows you to take readings and display them on the screen, determining where you want to increase the weight of the wheel to evenly distribute the mass and balance it, eliminating beats and vibrations.
Tire fitting in Kyiv: what a seasonal replacement is needed for
Even an inexperienced driver knows that you need to “change” your car on time, before each season. This is necessary due to differences in weather conditions, and investigative features of the ride. For example, the winter period requires proper rubber, the quality of which would ensure a confident ride on icy and snowy roads, while being resistant to low temperatures.
Winter rubber is softer than summer, and this provides its elasticity and adhesion to the road surface. Harder summer tires soften hot asphalt, and in winter – they just harden and do not provide the necessary traction. Traveling on summer tires in winter causes heavy snowdrifts and accidents. Conversely, winter tires become excessively soft in summer and wear out very quickly.
Winter and summer tires also differ in the tread pattern, which in the first version has more cross sections and spikes, and in the second – longitudinal, which provides water drainage.
Prices for tire fitting in our car service are calculated depending on the type of vehicle and the diameter of the disc.
The main stages of tire work:
- Parking. If it is necessary to replace all 4 wheels, the car is established on a special platform and fixed. You can do the job with a jack, but you need a very clear installation and mounting, as well as special stoppers and rubber gaskets.
- Dismantling. Immediately carefully unscrew the nuts, and then the wheel is removed from the seat.
- Car wash. Thorough wheel cleaning is required for proper balancing. It is best to carry it out in a special flushing unit, as this provides a better degree of cleaning and does not damage the wheels.
- Tire removal. After unscrewing the valve, the tire is squeezed out with parallel control over the condition of this valve. This requires care and experience to prevent damage. To properly squeeze the tire, it is necessary to do it in several stages, gradually turning the wheel and always after their descent.
- Installation of new tires. This requires a special tire machine on which the wheel is attached with clamps. Installation is performed from the inside with special care to avoid damage to the frame part.
- Inspection and lubrication with mounting paste. After the tires are installed, they must be inspected and lubricated before starting the beading. A special lubricant is provided for this, it is forbidden to use soap or machine oil – it threatens to destroy the material.
- Pump. It consists of 2 stages: on the first, for landing on a place, and on the second, individual bringing to necessary level. Pressure level control provides a good manometer. After balancing.
- Wheel mounting. Before installing the wheel, carefully inspect the disc and clean if necessary. It is strictly forbidden to lubricate the studs, because over time the lubricating substance crumbles, and the nut remains unscrewed. After landing the wheel on the bolts, a two-stage upholstery is performed. The main thing here is to plant the wheel clearly and evenly, because any twisting will break the threaded connection.
Our company offers professional tire fitting, the cost of which will definitely please you.
Where to replace the tire and tire prices?
Despite the fact that the cost of tire installation is low, many motorists still try to do it yourself. The work itself is not particularly difficult, but still requires further recourse to the service station for balancing. In its absence, there is a vibration that loads both the wheels themselves and the entire suspension. From vibration threaded connections weaken, nuts are unscrewed, sensitive sensors of the car fail.
For this reason, you should contact a specialized service, where at a fairly low price you can get quality tire fitting services and properly balanced wheels.