The injector is an injector – a mechanical fuel injector in engines, is part of the fuel injection system of a gasoline internal combustion engine, so cleaning the injector must be timely.
The car’s injector system is a system of forced fuel injection by means of injectors into the intake manifold or into the cylinder.
When the injector is dirty, the engine performance deteriorates, which is manifested in the following:
- the car accelerates poorly (engine power is lost);
- gasoline consumption increases;
- the engine at idle works unstable (there are superfluous twitches).
The causes of contamination of the injector are: long service life of the car, and / or the use of poor quality gasoline. Impurities that are in the gasoline, like glue, settle on the walls of the injector and on the filter built into the injector. Subsequently, the amount of gasoline passing through the injector decreases, gasoline instead of spraying pours into the cylinder of one jet and does not work well there, which leads to deterioration of the engine.
It is almost impossible to avoid contamination of the injectors, but this problem can be eliminated by cleaning the fuel injection system (cleaning the injector).
Our specialists, using special equipment, clean both the fuel system as a whole and the injectors separately.
If you start to notice a decrease in engine power, increased exhaust toxicity, unstable operation at low speeds and unnatural jerks when loading the engine, you may need to clean the injector. Kyiv, like many other large cities, provides many car services that are ready to help in this. However, it should be understood that this procedure is quite complex. To cope with this task, it is necessary to have not only theoretical knowledge but also extensive practical experience. That is why, if you need to clean the injector in Kiev, we recommend that you contact our car service.
Professional services provided by our car service for cleaning the nozzle:
Our specialists will perform high-quality and inexpensive work related to cleaning the injector. Services we provide:
- diagnostics on the modern equipment of all types of injectors established on any brands of cars;
- possibility to clean the injector using ultrasonic or chemical technology;
- quality of work performed and warranty on it.
Clean the nozzle (injector) with ultrasonic waves can be as follows: removing the injector, placing in an ultrasonic container, washing by cavitation with a cyclic increase in intensity.
To clean an injector without removal – to wash out an injector with special chemical liquid – it is possible at full shutdown of fuel system and the petrol pump.